Dhairya Enterprise

SS Hand Pallet Truck (Stainless Steel Hand Pallet Truck) is a manual material‑handling device designed for environments where corrosion resistance, hygiene and durability are critical. Built predominantly from high‑grade stainless steel (such as SS 304 or SS 316) — including the frame, forks, hydraulic pump and handle — this pallet truck is rust‑proof, easy to clean and ideal for wash‑down areas, making it well suited for food processing units, pharmaceutical plants, chemical industries, cold storages and cleanrooms where contamination must be minimised.

Operated manually via a hand‑pumped hydraulic lifting system, an SS hand pallet truck lets operators lift and move palletised loads smoothly without electricity or batteries. The ergonomic tiller handle typically includes a three‑position control lever (lift, neutral, lower) for precise handling, while PU or nylon wheels ensure quiet and smooth manoeuvrability on factory floors. Typical load capacities range from about 2000 kg to 3000 kg depending on the model and build.

The robust corrosion‑resistant design reduces maintenance costs, extends service life and ensures reliable performance even under moist, wet or chemically aggressive conditions, making SS hand pallet trucks a preferred choice in hygiene‑sensitive industries and tough industrial workflows.

MS Hand Pallet Truck (Mild Steel Hand Pallet Truck) is a manual material handling device widely used in warehouses, factories, distribution centres, retail stores, and logistics facilities to lift, move, and transport palletised loads over short distances. Constructed mainly from high‑strength mild steel (MS), these pallet trucks are durable, cost‑effective, and capable of withstanding regular industrial use while providing reliable performance without the need for electrical power.

The truck consists of two tapered forks that slide easily under standard pallets and a hydraulic pump and tiller handle that allow operators to raise the load just enough to clear the floor for movement. Typical load capacities range from about 2000 kg (2 ton) to 3000 kg (3 ton), with maximum lifting heights around 200 mm, making them ideal for everyday warehouse tasks including loading/unloading, pallet transfers, and staging shipments.

MS Hand Pallet Trucks are equipped with ergonomic control handles and polyurethane or nylon wheels for smooth manoeuvring even in tight aisles, and their heavy‑duty mild steel frame with protective coatings helps resist wear and tear in busy work environments.

Warp Beam Pallet Truck is a specialised manual material handling trolley designed specifically to lift, transport and position warp beams, paper reels and other large cylindrical loads used in industries such as textile mills, fabric processing plants, weaving units and printing presses. Unlike conventional pallet jacks, this truck features a V‑shaped or cradle‑style beam support design, allowing the beam flange to rest securely while being moved, which prevents rolling and reduces the risk of damage during transport.

Built with a robust steel frame, ergonomic handle, and smooth PU/nylon wheels, warp beam pallet trucks provide stable and safe handling of heavy beams. Load capacities typically range from around 600 kg up to 3000 kg or more, with fork or cradle lengths custom‑built to suit specific beam widths and diameters. Hand‑operated hydraulic lifting mechanisms allow workers to lift beams from the floor and transport them through production floors, storage areas, or between machines with ease.

Ideal for textile and allied industries, warp beam pallet trucks reduce manual effort, improve workflow efficiency, and ensure safe, damage‑free movement of heavy cylindrical materials in tight or crowded spaces.

SS 304 Manual Pallet Jack refers to a stainless steel manual pallet truck built primarily from SAE 304 stainless steel, the most common corrosion-resistant grade of stainless. It combines the simplicity of a basic pallet jack — a hand-operated device used to lift and move palletized loads — with the enhanced durability and hygiene benefits of stainless steel construction.

This type of pallet jack uses a manual hydraulic pump operated by a tiller-style handle to raise and lower the forks, enabling efficient movement of goods in warehouses and production facilities. The SS 304 build makes it especially suited for environments where resistance to rust, acids, moisture, and frequent wash-downs is essential, such as pharmaceutical, food & beverage processing, cleanroom operations, and chemical plants. 

Hand Pallet Truck — also known as a manual pallet jack, pallet trolley, or pump truck — is a fundamental manual material handling tool used to lift, move, and transport palletised loads across short distances in warehouses, factories, retail stores, logistics centres and loading docks. It consists of two tapered forks that slide under a pallet, a hand‑operated hydraulic pump system, and steerable wheels that enable smooth movement without any electrical power source. By pumping the handle, the hydraulic system raises the forks just enough to clear the floor so goods can be pushed or pulled easily.

Hand pallet trucks are valued for their simple design, cost‑effectiveness, durability and low maintenance, making them ideal for everyday tasks such as loading and unloading trucks, transferring inventory within warehouses, staging pallets for dispatch, and organising stock. Typical load capacities range from about 2000 kg to 5000 kg, and trucks often include ergonomic handles with three‑position control levers (lift, neutral, lower) and PU, nylon or rubber wheels for smooth manoeuvrability in tight spaces.

Their compact size, ease of operation and reliability make hand pallet trucks an indispensable choice for manual material handling where powered equipment is unnecessary or impractical.

Hand Pallet Truck — also known as a manual pallet jack, hand pallet trolley or pump truck — is a manual material‑handling device used to lift, move and transport palletised loads over short distances in warehouses, factories, distribution centres, retail stores and logistics hubs. It uses a hand‑operated hydraulic pump system to raise the forks just enough to clear the floor, allowing heavy pallets to be pushed or pulled with minimal effort and no electricity or battery power required, making it a cost‑effective solution for many material handling tasks.

Constructed with a heavy‑duty steel frame, tapered forks that slide under pallets, and smooth‑rolling wheels (often nylon or polyurethane), hand pallet trucks offer durable, reliable performance and low maintenance. Typical load capacities range from around 2 tonnes (2000 kg) to 5 tonnes (5000 kg) depending on the model, and ergonomic tiller handles with a three‑position control lever (lift/neutral/lower) make operation intuitive and efficient.

Hand pallet trucks are essential in material handling for tasks like loading/unloading goods, transferring inventory within storage areas and staging pallets for dispatch, enhancing productivity while reducing manual strain in everyday warehouse operations.

Stainless Steel Hand Pallet Truck is a manual material handling device designed for lifting, transporting, and positioning palletised loads in environments where hygiene, corrosion resistance, and durability are critical. Unlike traditional mild steel pallet jacks, this model is built with high-grade stainless steel (SS 304 or SS 316) construction — including the forks, frame, handle, hydraulic pump, and fasteners — making it ideal for food processing units, pharmaceuticals, cold storage, chemical plants, marine use, and cleanrooms where contact with moisture, acids, salts, and wash-down cleaning is common.

Equipped with a hand-operated hydraulic lift and ergonomic 3-position control handle (lift/neutral/lower), the SS hand pallet truck delivers smooth, rust-free performance while reducing operator fatigue and improving workplace safety. Its wheels — typically made from PU, nylon, or optional stainless cores — ensure quiet and smooth manoeuvring over warehouse floors. The corrosion-proof design also means low maintenance, long life, and compliance with hygiene standards in sensitive industrial and manufacturing settings.

Stainless Steel Hand Pallet Truck With Weighing Scale is a premium manual material handling and weighing solution that combines the functions of a traditional hand pallet jack with an integrated digital weighing system — ideal for environments where hygiene, corrosion resistance, and accurate load measurement are essential. Constructed primarily from high-grade stainless steel (such as SS 304 or SS 316), this pallet truck offers rust-proof durability and easy cleaning, making it perfect for food processing, pharmaceutical, chemical, dairy, and cleanroom industries where strict sanitation standards are required.

The built-in weighing system uses precision load cells integrated into the fork structure to measure the weight of palletised goods as they are lifted and moved, eliminating the need for a separate floor scale. Typical features include a backlit digital display, tare/zero functions, rechargeable battery power, and accurate measurement up to 2000–2500 kg with high precision. The ergonomic handle and hand-operated hydraulic lifting ensure smooth transport and weight checking in one operation, enhancing efficiency in warehouses, shipping docks, and inventory checkpoints.

Customized Heavy Duty Pallet Truck is a specialised material handling solution designed to meet specific industrial requirements for moving and lifting very heavy or unusually sized loads that go beyond standard pallet truck capacities. Unlike off‑the‑shelf models, these trucks are built to customer specifications — including customised fork length, fork width, chassis strength, load capacity, and wheel configurations — to handle unique load dimensions, weights and operational conditions in industries like steel, fabrication, heavy engineering, paper mills and manufacturing yards.

Constructed with reinforced high‑strength steel, robust hydraulic systems, and heavy‑duty components, a customized heavy duty pallet truck can support load capacities well above regular models — often ranging from 2 tons up to 20 tons or more, depending on design. Forks, wheels and handles can be tailored for oversized pallets, dies, coils or irregular cargo, while ergonomic and safety enhancements (like specialised grips or overload protection) can be included to suit workplace needs.

These customised solutions improve operational efficiency, reduce manual strain, and optimise workflow in demanding industrial environments where handling heavy or awkward loads with standard trucks isn’t practical.

SS 304 Hand Pallet Truck for Pharma / Food Industry is a premium manual material handling solution designed for environments where hygiene, corrosion resistance and contamination control are critical. Constructed from high-grade SS 304 stainless steel, all major components—including the forks, chassis, hydraulic pump, handle and fasteners—are corrosion-resistant and easy to clean and sanitize for regular wash-downs in pharmaceutical plants, food processing units, cold storage, dairy and cleanroom facilities. This pallet truck offers smooth hydraulic lifting and lowering, ergonomic three-position control for lift/neutral/lower, and robust load capacity options typically ranging up to 2500 kg or more. Its corrosion-resistant design helps prevent rust, bacterial buildup and contamination—important for maintaining GMP, HACCP or food safety compliance in sensitive operations. Smooth nylon or polyurethane wheels enable effortless manoeuvrability even in wet or high-moisture conditions, while the low-profile fork design works seamlessly with standard pallets. With long service life, minimal maintenance and strong structural integrity, an SS 304 hand pallet truck enhances efficiency, safety and sanitation in pharma, food, beverage, dairy and related industries.

Hand‑Pushed Pallet Truck — also known as a manual pallet truck, hand pallet jack or hand‑propelled pallet trolley — is a widely used manual material‑handling device designed to lift, move and transport palletised loads across short distances in warehouses, factories, logistics centres, retail stockrooms and distribution hubs. It is operated entirely by human effort, with the operator pushing or pulling the truck while using a tiller or pump handle to steer and control the hand‑operated hydraulic lifting system. By pumping the handle, the hydraulic mechanism raises the forks just enough to lift the pallet off the ground, enabling smooth movement without any electric power.

Built with a heavy‑duty steel frame, tapered forks that easily slide under pallets, and durable PU, nylon or rubber wheels, hand‑pushed pallet trucks provide reliable performance, low maintenance and cost‑effectiveness even in tight indoor spaces. Typical load capacities range from approximately 2000 kg to 5000 kg, making them suitable for everyday tasks such as loading and unloading trucks, transferring inventory within storage areas, staging pallets for shipment and internal transport where powered equipment is impractical or unnecessary. Their simple design, ergonomic handles and ease of use make hand‑pushed pallet trucks a staple in manual material handling operations.

Hand Pallet Truck — also known as a manual pallet jack or hand pallet trolley — is a fundamental manual material handling tool used to lift, move and transport palletised loads over short distances in warehouses, factories, distribution centres, retail stores and logistics facilities. It consists of a sturdy steel frame with two tapered forks that slide under the pallet, a hydraulic lift system operated by a tiller or pump handle, and smooth‑rolling wheels that make maneuvering heavy goods easy without electric power. By repeatedly pumping the handle, the hydraulic mechanism raises the forks just enough to clear the floor, allowing users to push or pull heavy loads with minimal physical effort.

Hand pallet trucks are valued for their simple design, durability, low maintenance and cost‑effectiveness. They come in a variety of load capacities — typically from about 1 ton to 5 tons (1000 kg to 5000 kg) — and are ideal for routine tasks like loading/unloading vehicles, shifting inventory within storage areas, staging pallets for dispatch, and internal material movement. Their compact construction and ergonomic handles make them especially useful in tight indoor spaces where powered handling equipment is impractical.

Hand Pallet Truck, also known as a manual pallet jack or pallet trolley, is a simple and essential material handling device used to lift, move and transport palletised loads over short distances in warehouses, factories, logistics hubs, retail stockrooms and distribution centres. It consists of two tapered forks that slide under a pallet, a manual hydraulic pump mechanism operated by a tiller handle, and smooth‑rolling wheels that make it easy to manoeuvre heavy goods without powered equipment. By pumping the handle, the hydraulic system raises the forks just enough to lift the pallet off the ground, allowing goods to be pushed or pulled to the desired location.

Hand pallet trucks are built with sturdy steel frames, ergonomic handles and PU or nylon wheels for durability and reliable performance, even in tight spaces. Typical load capacities range from around 2000 kg (2 ton) to 5000 kg (5 ton) depending on the model, making them suitable for a wide range of industrial tasks. Their simple design, low maintenance, and ease of use make them an indispensable tool for everyday material movement, loading/unloading, inventory transfers, and internal transportation where forklifts may be impractical.

• Hand‑Operated Pallet Jack — also referred to as a manual pallet jack, hand pallet truck, or hand‑propelled pallet trolley — is a manual material‑handling device used to lift, move and transport palletised loads over short distances in warehouses, factories, distribution centres, logistics hubs and retail stockrooms. It features two fork arms that slide underneath a pallet and a hydraulic lifting mechanism operated by a hand pump or tiller handle. By pumping the handle, the built‑in hydraulic system raises the forks just enough to lift the pallet off the ground, enabling users to push or pull heavy loads without the need for electricity or batteries. A three‑position control lever (lift/neutral/lower) provides smooth and controlled handling. 
• Hand‑operated pallet jacks are constructed with heavy‑duty steel frames, ergonomic handles and durable PU, nylon or rubber wheels for reliable performance and easy manoeuvrability even in narrow aisles. Typical load capacities range from around 1 tonne (1000 kg) to 5 tonnes (5000 kg) depending on the model and build. Their simple design, low maintenance and cost‑effectiveness make them ideal for everyday material handling tasks such as loading/unloading trucks, transferring inventory within storage areas, staging pallets for dispatch and internal transport in industrial and commercial settings. 

Hand‑Propelled Pallet Truck — also known as a manual pallet truck, hand pallet jack, or pallet trolley — is an essential manual material handling device designed to lift, move and transport palletised goods over short distances in warehouses, factories, storage facilities, retail stockrooms and logistics centres. It operates completely by human power, using a tiller or control handle to steer and a hand‑pumped hydraulic mechanism that raises the forks just enough to clear the floor, enabling heavy loads to be pushed or pulled without electric power.

Featuring a heavy‑duty steel frame, tapered forks that slide easily under pallets, and durable PU, nylon or rubber wheels, hand‑propelled pallet trucks combine simple design, low maintenance and reliable performance even in tight indoor spaces. Typical load capacities range from around 1 ton to 5 tons (1000 kg to 5000 kg) depending on model, making them suitable for everyday material handling tasks such as loading and unloading trucks, shifting inventory within storage areas, staging pallets for dispatch and internal transport where powered forklifts are unnecessary or impractical.

Their compact build, ergonomic handles and three‑position control (lift/neutral/lower) make hand‑propelled pallet trucks a cost‑effective and widely used solution for manual material movement in industrial and commercial settings.

Heavy Duty Hand Pallet Truck is a manual hydraulic material‑handling device designed for lifting, transporting, and positioning heavy palletised loads in warehouses, factories, industrial facilities, logistics centres, and distribution hubs. Built for robust performance, these pallet trucks are constructed with high‑strength steel frames, reinforced forks, and reliable hydraulic systems that enable them to handle large load capacities — commonly from about 2.5 ton to 5 ton (2500–5000 kg) with stability and control. They are ideal for demanding industrial applications where frequent movement of heavy goods is required without powered equipment.

Heavy duty hand pallet trucks usually feature durable PU or nylon wheels, ergonomic control handles with three‑position levers (lift/neutral/lower) for smooth operation, and optimized fork dimensions compatible with standard pallets. The hydraulic pump allows operators to raise pallets off the floor with minimal physical effort, reducing strain and improving workplace efficiency. Their rugged construction and low‑maintenance design ensure long service life even under rigorous use, making them indispensable for material handling tasks like loading/unloading, pallet transfers, workflow staging and internal transport in tight indoor spaces.

Industrial Hand Pallet Truck is a rugged, manual material handling tool designed to lift, move, and position palletised loads efficiently within warehouses, factories, distribution centres, manufacturing floors, and industrial facilities. It features a heavy‑duty steel frame, twin forks that slide under pallets, and a hydraulic pumping system operated by a handle to raise and lower loads with minimal physical effort — making it ideal for transporting heavy goods over short distances without powered equipment.

Specifically engineered for industrial applications, these pallet trucks are built for durability, low maintenance, and high manoeuvrability in busy work environments. Typical load capacities range from around 2000 kg to 3000 kg or more, with robust construction and polyurethane or nylon wheels for smooth movement even on rough surfaces.

Commonly used across textile mills, sugar factories, food industries, foundries, machine shops, and paper mills, industrial hand pallet trucks help streamline workflows, reduce manual labour strain, and improve safety by enabling quick and controlled movement of palletised materials.

Stainless Steel Hand Pallet Truck is a manual material‑handling device designed for environments that demand high hygiene, corrosion resistance, and long‑lasting durability. Constructed predominantly from SS 304 or SS 316 stainless steel, including the frame, forks, hydraulic pump and handle, it is rust‑proof, easy to sanitize and ideal for wet or corrosive workplaces such as food processing units, pharmaceutical plants, chemical facilities, cleanrooms and cold storage areas. The stainless steel build prevents rust and contamination and withstands frequent wash‑downs and harsh environmental conditions.

Operated manually, this pallet truck uses a hand‑pumped hydraulic lifting system to raise palletised loads off the floor, enabling them to be pushed or pulled with minimal effort. Typical load capacities range from 2000 kg to 3000 kg or more, with ergonomic control handles and durable PU, nylon or stainless‑steel core wheels for smooth manoeuvrability on factory or warehouse floors. The hygienic design — featuring smooth surfaces and easy‑clean welds — reduces contamination risk and lowers maintenance requirements, making stainless steel pallet trucks a preferred choice where sanitation and corrosion resistance are essential.

SS 304 Hydraulic Hand Pallet Truck is a manual material‑handling device made almost entirely from high‑grade SS 304 stainless steel, designed for corrosion‑resistant, rust‑proof and hygienic performance in environments where cleanliness and durability are critical — such as pharmaceutical facilities, food processing units, chemical plants, cold storage, marine operations and cleanrooms. The stainless steel construction includes the frame, forks, pump, handle and fasteners, providing excellent resistance to moisture, acids, saline conditions and routine wash‑downs without corroding.

This truck operates using a hand‑operated sealed hydraulic system, with a three‑position ergonomic control lever (lift/neutral/lower) for controlled handling of palletised loads. Typical load capacities range from about 2000 kg to 2500 kg, with standard fork lengths around 1150–1220 mm and durable PU/nylon wheels for smooth movement and maneuverability. The polished, easy‑to‑clean surfaces and corrosion‑proof design make it ideal for sanitary and hygiene‑sensitive industrial settings, reducing maintenance and preventing contamination while ensuring reliable, long‑service performance.